This fully potted, weatherproof module can be wired into the power supply of a coil per cylinder ignition system, where it senses current and creates a conventional 12V square wave signal output which can be utilized by AutoMeter tachometers and many aftermarket RPM activated devices. Ideal for vehicles with late model engine swaps and applications […]
Tag: tach
1941-1948.500 Machinery Tachometer Dive Adapter Stewart Warner Tach Reliance
Normal rotation (Non-reversing/for clockwise sweeping tachometers) drive. The drive and cable have been tested and confirmed to be in good working condition. The drive and cable both turn freely. The worm and pinion gears inside the drive have been checked and found to have only very slight wear. The worm and pinion gears have been […]
90 Degree. 500 Tachometer Engine Synchronizer Drive Adapter Tach Glendinning
500 ratio takeoff drive adaptor kit for installing engine synchronizers and mechanical cable or generator driven tachometers on Detroit marine diesel engines. Will also work on V8 gasoline engines. Note that the standard Glendinning drive kit that’s used with Chrysler and Chevrolet marine gasoline engine uses a slightly shorter takeoff cable: A 3 and 3/4″ […]
Auto Meter 2189 LS Engine Plug & Play Wire Harness For #9117 Tach Adapter NEW
This fully potted, weatherproof module can be wired into the power supply of a coil per cylinder ignition system, where it senses current and creates a conventional 12V square wave signal output which can be utilized by AutoMeter tachometers and many aftermarket RPM activated devices. Ideal for vehicles with late model engine swaps and applications […]