Title: 30 ROW AN10 Engine Oil Cooler + Filter Adapter Kit + Fixed Fan. Color: same as the picture. About the Oil Cooler. Inlet / Outlet Size: AN-10. Core Size: 11.53″ x 8.7″ x 2.00. Overall Size: 13″ x 9.8″ x 2.00. Made with High Quality T-6061 Aluminum. Potentially Reduces Oil Temperature up to 50°F. Powder-Coated and Oxidized for Durability and Protection. Helps Reducing Coolant Temperature and Extends Engine Life. Excellent for Modified Street Vehicles, which are Driven Hardly with Minimal Track Use. Professional Installer is Highly Recommended (No Instruction Included). Center Adapter: M20 x 1.5 & 3/4 x 16 UNF Thread. Supports Oil Filters That Has M20 Thread & M20 Block Fitting. It Mounts between the Block and oil Filter, provides in and out ports, with connectors that fit AN10 fitting. Allows Installation of Larger Oil Filter. 10-AN Male Fitting and 0.875″ x 12.125″ Bolt Pattern. Made of High Quality Lightweight Aluminum with CNC Laser Cut. Oil Filter Relocation for Easier Access, a Must for Hard-To-Reach Oil Filters. Comes with 2 Oil Lines(Lengths:1.4M? 1.6M), 1 Hose Separator and 1/8 NPT Threaded x 1. Increases Engine Oil Capacity Available; thus, Enhances Oil Lubrication and Protection of Engines. OVER SIZE : H : 220mm W : 245mm. CFM ratio- 1550 cfm. JDM Spec racing design. Direct bolt on installation. Amp draw: 12.70 amps. Maximum fan CFM: 1,730 cfm. Maximum fan RPM: 2,250 rpm. 100% Brand new never used or installed. Includes mounting stand for easy installation. Made with high quality, lightweight and durable plastic. A great upgrade for your vehicle Diameter blade to blade – 7. Improves the cooling to your entire engine bay including oil cooler system and transmission 2.5 deep slim design making it great to install in small, tight areas and provide excellent bay clearance Can be used in different application, the mounting stand’s width 315mm so it could be used for most oil cooler’s width is 292mm 300mm Can be used to push or pull. (remove the bolt at the center of the fan, and reverse the fan blades and bolt it back on). 7 Cooling Fan 1. 3/4-16 Female Fitting 1. M20XP 1.5 Female Fitting 1. GPLUS Oil Filter Adapter 1. GPLUS Aluminum Oil Cooler 1. 10-AN Hose Line Separator 1. 10-AN 0 Degree Swivel Aluminum Hose End 2. 10-AN 90 Degree Swivel Aluminum Hose End 2. GPLUS Braided Nylon Hose 2(56″ 1 + 62″ 1). This information is provided by the carrier and excludes weekends and holidays. We will give you a satisfactory solution for sure. It will be kind of you to respect and cherish the feedback system like we do. Actually your fair feedback will be the best stimulation for our work.